DENR-EMB Wood Processing Guidelines

A wood processing facility must comply with two regulatory areas:

  1. DENR–Forest Management Bureau (FMB): Authorization to establish and operate a Wood Processing Plant (WPP).
  2. DENR–Environmental Management Bureau (EMB): Environmental clearances and permits covering air emissions, wastewater, solid waste, and other environmental impacts.

These requirements are particularly relevant if the facility will process agarwood chips, botanical raw materials, essential oils, extracts, and other plant-derived products.

1. Primary regulatory framework

Key DENR issuances and environmental laws

RegulationSubject
DAO 2021-05Revised Regulations Governing the Establishment and Operations of Wood Processing Plants
DAO 2020-18Tree plantation development and harvesting of planted trees
RA 8749Philippine Clean Air Act
RA 9275Philippine Clean Water Act
RA 9003Ecological Solid Waste Management Act
RA 6969Toxic Substances and Hazardous and Nuclear Wastes Control Act
PD 1586Philippine Environmental Impact Statement System

DAO 2021-05 is the principal forestry regulation to examine when determining whether a facility needs a Wood Processing Plant Permit (WPPP). 

2. Wood Processing Plant Permit (WPPP)

DENR-FMB / DENR Regional Office

A Wood Processing Plant Permit is a forestry authorization for qualifying wood processing facilities.

The DENR Citizen’s Charter identifies the following application requirements: 

RequirementDescription
Application formDuly accomplished application
Corporate registrationSEC Certificate and Articles of Incorporation
AuthorizationBoard resolution or authority for the signatory
Feasibility studyBusiness plan and processing operations
Business permitLGU-issued permit
ECC/CNCEnvironmental clearance, as applicable
Machine ownershipEvidence of ownership of processing machinery
Location mapGIS-generated map and geotagged photographs
DENR certificationCertification that the location is not within an illegal logging hotspot

Important: The WPPP is separate from an EMB Environmental Compliance Certificate. Obtaining one does not automatically satisfy the other.

3. DENR-EMB environmental permits

Environmental compliance

The following permits may apply depending on the actual machinery, production process, emissions, and wastewater generated.

Permit / ClearanceWhen applicableLegal basis
Environmental Compliance Certificate (ECC)Projects covered by the Philippine EIS SystemPD 1586
Certificate of Non-Coverage (CNC)Projects determined not covered by the EIS SystemPD 1586
Permit to Operate (PTO)Equipment producing regulated air pollutionRA 8749
Wastewater Discharge PermitFacility discharging regulated wastewaterRA 9275
Hazardous Waste Generator IDFacility generating regulated hazardous wasteRA 6969
PCO AccreditationWhen required for the establishmentApplicable DENR regulations

A. Environmental Compliance Certificate (ECC) or CNC

The project must undergo EMB screening to determine its environmental classification.

Typical supporting documents include:

  • Project description and capacity.
  • Site development plan and vicinity map.
  • Location and land-use compatibility documents.
  • Process flow diagram.
  • Machinery and equipment list.
  • Air pollution control system details, if applicable.
  • Wastewater management plan, if applicable.
  • Geotagged site photographs.
  • Proof of authority over the property.

Important terminology: CNC means Certificate of Non-Coverage, not Certificate of Non-Compliance. It is not a general exemption from environmental laws or other operating permits.

B. Permit to Operate (PTO) – Clean Air Act

Applicable equipment may include:

  • Industrial boilers.
  • Diesel-fired generators.
  • Furnaces and combustion equipment.
  • Thermal processing equipment.
  • Other regulated air pollution sources.

Common supporting requirements include:

  1. Accomplished EMB application.
  2. Engineering report.
  3. Plant process description.
  4. List and capacity of air pollution source equipment.
  5. Air pollution control equipment specifications.
  6. Equipment layout and technical drawings.
  7. Environmental management plan.
  8. ECC or CNC, as applicable.
  9. PCO designation and accreditation documents, when required.

C. Wastewater Discharge Permit – Clean Water Act

This is relevant when the facility discharges regulated wastewater.

Potential wastewater sources include:

  • Equipment and floor washing.
  • Raw material washing.
  • Steam distillation condensate and process wastewater.
  • Extraction equipment cleaning.
  • Boiler blowdown.
  • Sanitary wastewater.

The engineering report should cover:

  • Wastewater sources and characteristics.
  • Daily water consumption.
  • Wastewater volume.
  • BOD, TSS, oil and grease, and other relevant parameters.
  • Wastewater treatment process.
  • Effluent quality.
  • Receiving water body or disposal arrangement.

A wastewater treatment system may be required depending on the process and discharge arrangement. 

D. Hazardous Waste Management

Potential regulated waste streams include:

WastePossible classification
Used contaminated oilHazardous waste
Spent solventsHazardous waste
Chemical-contaminated containersDepends on contamination
Laboratory chemical residuesDepends on composition
Contaminated absorbentsDepends on contamination
Ordinary wood residuesGenerally non-hazardous, subject to proper assessment

Where hazardous waste is generated, the facility must comply with applicable generator registration, labeling, storage, manifesting, and authorized transport and treatment requirements.

4. Wood processing operational requirements

Aside from environmental compliance, the facility should establish the following operational controls.

AreaRecommended documentation
Raw material procurementSupplier registration and invoices
Timber originCertificate of Verification or other applicable origin documents
InventoryRaw material receiving and stock ledger
ProductionProcessing records and production reports
EquipmentMachinery inventory and maintenance records
Waste managementWaste segregation and disposal records
Product dispatchSales invoices and applicable transport documents
TraceabilityBatch identification and raw-material-to-product records

For timber and lumber movements, DENR’s Citizen’s Charter identifies Certificate of Timber/Lumber Origin (CTO/CLO) services for processed materials from a wood processing plant. The correct documentation for agarwood products should be confirmed with the forestry office based on the material and transaction. 

5. Special considerations for agarwood processing

For CAPC, it is important to distinguish between conventional wood processing and botanical or agarwood extraction.

A. Agarwood wood processing

  • Log or wood cutting
  • Chipping and grinding
  • Wood sizing and grading
  • Chip preparation
  • Wood product manufacturing

B. Agarwood distillation and extraction

  • Steam distillation
  • Hydro-distillation
  • Essential oil extraction
  • Botanical extraction
  • Aroma fractionation and purification

C. Advanced botanical processing

  • Supercritical CO₂ extraction
  • Oil processing
  • Botanical extract production
  • Fragrance formulation
  • Product packaging

Regulatory distinction: Do not automatically assume that an essential oil extraction facility requires a WPPP simply because it processes agarwood. Conversely, do not assume that it is exempt. Ask DENR-FMB for a written determination of whether the actual machinery and activities fall within DAO 2021-05.

6. Recommended compliance roadmap

SequenceActionAgency
1Confirm land-use and zoning compatibilityLGU
2Determine WPPP applicabilityDENR-FMB / Regional Office
3Environmental screening and ECC/CNC applicationDENR-EMB
4Secure WPPP, if applicableDENR
5Apply for PTO, if applicableDENR-EMB
6Apply for Wastewater Discharge Permit, if applicableEMB / LLDA
7Register hazardous waste generator, if applicableEMB
8Secure PCO accreditation, when requiredEMB
9Secure business and occupancy permitsLGU
10Implement environmental monitoring and reportingEMB

For a CALABARZON facility, the relevant regional environmental office is EMB Region IV-A.

7. Official regulatory references

8. Recommended compliance documentation package

I recommend preparing a consolidated DENR Regulatory Compliance Manual for Crown Agarwood Processing Corp., covering:

  1. Wood Processing Plant Permit applicability assessment.
  2. ECC/CNC application documentation.
  3. Air Pollution Source Inventory and PTO.
  4. Wastewater Treatment and Discharge Management.
  5. Hazardous Waste Management Plan.
  6. Pollution Control Officer requirements.
  7. Raw Material Legality and Traceability.
  8. Environmental Monitoring and Compliance Reports.

One important question: What will be the principal operation of the CAPC facility?

Select the facility’s intended operationsWood processing onlyDistillation and extraction onlyBoth wood processing and distillation/extractionFull integrated processing and manufacturing

Facility location Cavite / CALABARZON Antique / Western Visayas Other location

Prepare CAPC compliance checklist

This will help establish which permits CAPC actually needs, rather than applying for unnecessary permits or overlooking a mandatory authorization.